Sign in to follow this  

Abc Reception Stuttering

Recommended Posts

Hi guys,

It's been a long time between posts - I'm hoping you guys can help me out once again!

I've got a Windows 7 Media Center up and running with dual tuners. Everything appears to be working just fine (I'm almost there, then I'll image this bugger!) except for ABC reception. Specifically, it is ALL ABC channels (2, 21, 22, 23, 24) that are showing random stuttering. In summary the stuttering is unwatchable. All other TV channels work just fine.

When I go to Guide > Edit Channels > Edit Source or whatever it is, it shows the ABC channels Quality at 99% for both tuners, for each of the ABC channels.

I've rescanned TV channels and ensured only the recent scanned sources are appearing for each channel.

Any ideas guys? Is the signal too strong or something like that (ie: 99%)?

Software: Windows 7 Professional 32-Bit (Clean Install, Genuine), MCE Standby Tool 0.9.100 (W7 Beta), Zonealarm Personal Firewall, AVG Free Edition, IceTV Trial.

Hardware: Asus M2N32-SLI Deluxe, AMD AM2 5600+, 2GB, AverMedia A16A/A16AR PCI Hybrid DVB-T TV tuners (*2), GeForce 7900GS 256MB, external aerial (I live in an apartment).

Location: Kingston, ACT/Canberra.

NB: I have a Sony TV with built in digital tuner. This is plugged into the same wall outlet for the aerial in the apartment (wall outlet has 3 inputs for aerials). Digital TV from the TV works absolutely perfect on ALL channels, including ABC.

Any help would be appreciated.


Share this post

Link to post
Share on other sites

Ray, as noted on the other forum...

Suggest running the tuner device with a third party application like TSReader Lite to see whether it behaves OK. In other words, to see whether it's a tuner or Media Center issue.

Share this post

Link to post
Share on other sites

hi Ray

There are 2 things that could be causing your issue.

1. you are getting signal for the ABC from both the Tuggeranong and Weston Creek/Woden transmitters on Freq 746.5MHz, broadcast channel 59. If you are getting signal from both of these transmitters they will "cancel each other out" .

2. you are getting your signal from the Black Mountain Tower and your media center receiver is not automatically getting the channel offset of the broadcast frequency, and you would need to manually input it. (it's on channel 9A and the frequency is 205.625MHz)

I think it's probably the former if you're getting such high quality signal

but since the TV works perfectly... check the broadcast channel for the ABC on your TV and make sure that the pc is getting the same one. If it still doesnt work, use the antenna supplied with the pc tv receiver not the external one.



Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Recently Browsing

    No registered users viewing this page.