Kogan Tv Will Not Start After Firmware Upgrade
Posted 10 April 2013 - 06:06 PM
Kogan gave me a firmware update to allow an increased number of supported video codecs for movies.
I installed same via a usb and watched the %progress on screen and at completion the set was supposed to automatically turn off and then back on.
It turned off ok but failed to restart and I'm now left with a unit that displays a red power button only and will not restart. I am concerned that
as it will not restart then maybe it can't be fixed since you can not select input for the usb.
I read on the net about a Samsung tv doing similar things and the remote required the 'Exit" button to be held for 30 secs. Is there some other means
of bypassing the conventional start up method ?....appreciate any words of wisdom...thanks Porks
Posted 10 April 2013 - 06:33 PM
each tv will have it's own special sequence of buttons to do secret squirrel things - ask kogan
Posted 10 April 2013 - 08:25 PM
As Harold says you need to ask Kogan. Either they'll have a 'squirrelly' button sequence or they'll ask to have the TV returned to them for the reset.
Posted 11 April 2013 - 08:52 AM
Yes I've had it off/on at the wall, no change.
It's the squirrelly thing I was hoping someone might know, but I guess all sets are different.
Just have to wait till Kogan get back to me....thanks again !
Posted 15 April 2013 - 07:21 PM
Good luck on that.