Eoi: Rotel Rsp-1066 + Rmb-1075
#1
Posted 08 March 2012 - 08:06 PM
Haven't been on for a while as I've been busy with work, but now that I have a bit of time I'm getting back into my gear. I'm looking at taking a new direction of HiFi > HT, so I'm looking at setting up a dedicated 2-channel system, and as such i'm putting my much loved Rotel gear up for sale. I have the following for your perusal:
PRE: RSP-1066
Surround modes: Dolby Pro Logic II, Dolby 3-, 5-, & 7-channel stereo, Dolby Digital, Dolby Digital EX, DTS, DTS-ES
Matrix, DTS-ES Discrete, DTS Neo:6, Music DSP
Analog inputs: 8 RCA line-level (2-channel), RCA (7-channel)
Digital inputs: 3 coaxial, 2 TosLink
Analog outputs: RCA L/R Front, Center 1,Center 2, L/R Rear, Center Back 1, Center Back 2, Sub 1, Sub 2, Zone 2 L/R, Tape, Video 1,2,3
Digital outputs: 1 coaxial, 1 TosLink
Other connectors: COM I/O, Zone 2 remote, External remote, Dual12V trigger, Dual IR out
Frequency response: 10Hz-95kHz, ±1dB, line level; 10Hz-20kHz, ±0.3dB, digital
Signal/noise: 95dB (stereo analog), 92dB (Dolby Digital, DTS), both IHF A-weighted
THD: <0.05%
IM distortion: <0.05%
Input sensitivity/impedance: 200mV/47k?, line level
http://www.hometheat...reamp-processor
http://www.audiorevi...30_1591crx.aspx
http://www.technofil...l_rsp_1066.html
POWER: RMB-1075
RMB-1075 5-channel, THX power amplifier
Frequency response: 10Hz-80kHz, ±0.05dB
Continuous power output: 120Wpc into 8ohms, 20Hz-20kHz
Speaker impedance: 4ohms minimum
Input impedance/sensitivity:33kohms/1.5V
Signal/noise: 115dB, A-weighted
Total harmonic distortion: <0.03%, 20Hz-20kHz
Intermodulation distortion: <0.05%
Dimensions: 1615/16" x 71/8" x 15" (WxHxD)
Weight: 43 lbs
http://www.hometheat...ier-7-2001.html
http://www.hometheat...power-amplifier
http://www.retrevo.c...846bh942/t/1-2/
Both in excellent condition, both black in colour, available for Western Sydney pickup or post at cost, and have been used to power B&W 703's and HTM1.
As I've been out of the loop for a little while I wanted to see what this gear was worth, I have some figures in mind, but I want to see what you guys think. Please feel free to ask anything about these units, and I will get some photos up tomorrow or the by the weekend.
Cheers,
James.
#2
Posted 09 March 2012 - 12:32 PM
There was a 1066 on audiogon a while ago and he struggled to get $300 including shipping,
if in fact he did sell it
The 1075 are fetching something like $800 on e-bay. Shipping can also be a problem, as Australia Post
limit the weight to 20 kilo's and the 1075 is just over that. Some PO will except them , some won't. I got one
via Aust Post. It's a case of who you know, not what you know.
If they where mine I would be asking $1200 for the pair, plus freight.
But have you considered using them for 2 channel and By'amping your speakers
#3
Posted 09 March 2012 - 02:33 PM
TBH I am open to offers if it means the unit moves sooner rather than later. It's not that I'm desperate to sell, but I have an idea I want to move on so I am keen. The pre/power is a great combination, however for HiFi the 703's seem to be a bit thirsty, for movies I have always loved the combination.
#4
Posted 12 March 2012 - 07:20 PM
Some photo's for your reference:



Will be putting up on eBay tomorrow too. Cheers guys.
#5
Posted 13 March 2012 - 06:14 AM
#6
Posted 13 March 2012 - 10:55 AM
Please tell me if you are willing to sell the amp separately ,as i bought a receiver recently,and it does not power my speakers with authority,and if you are how much would you accept.
I trie to pm you ,but it said you cant receive messagesl
#7
Posted 13 March 2012 - 11:34 AM
To be honest, I'd prefer to sell them as a combo together. They are a great sounding pair.
James.
#8
Posted 03 April 2012 - 06:18 PM
Cheers guys.
#11
Posted 04 April 2012 - 09:56 PM
The Power Amp is worth more than the asking price for both IMHO anyway.
Edited by Chopsus, 04 April 2012 - 09:57 PM.
#12
Posted 12 April 2012 - 10:44 AM
#13
Posted 17 April 2012 - 09:35 AM
If the items still available can you PM me to aphandu@hotmail.com
I'm in hornsby area, interested to both of your gear
just have few questions about it and if possible to demo them
I can schedule them this coming weekend sat or sun
Thanks
#14
Posted 29 April 2012 - 01:11 PM
Sorry been flat out with work! Yes, both items are still for sale. I can arrange a Demo here too if your serious. Let me know, cheers.
#15
Posted 30 April 2012 - 09:57 AM
Mannah, on 29 April 2012 - 01:11 PM, said:
Sorry been flat out with work! Yes, both items are still for sale. I can arrange a Demo here too if your serious. Let me know, cheers.
Can you please PM me a mobile number so I can get in contact with you?
I am fairly interested.
#16
Posted 01 May 2012 - 06:46 AM










