Yes worth checking all connections & also cable quality of Fly leads. I also wonder whether you may be pushing the length capabilities of RCA without some sort of booster. I am assuming that you have used a high end RCA leads. My guess is that you may dropping over the edge of signal when connecting through the walls plates & extra fly leads.
If I was doing this I would look for a component balun set of wall plates with IR over cat5/6. Possibly not much more than what was paid for high end RCA cables suitable for that distance plus adds the ability to control device at other end with IR. http://www.radioparts.com.au/product/39894091/pro1254d-audio-video-component-ir-cat5-clipsal-extender-kit#.WA0iNOT_p9A
Another way to solve this if you have no success with connections could be to leave the audio cable, which I assume works fine & add a Component video wall plate balun set only over cat5/6. http://www.radioparts.com.au/search-products?productsearch=pro2 pro1200
Hope this helps - happy solving!!
thanks guys, yeah i won't be removing the back by myself anytime soon.
the standby light used to turn on, but now it doesn't. there is still an audible "click" when i push the power button on and off though.
Not so much the e-shift ; I only use it when inputting 1080i signals as it does better with hd than sd imo ; but the MPC [ multi pixel control ] which uses an algorithm to sharpen certain details in the foreground while leaving the background softer . This is the menu under which you find e-shift on/off [at least on my 7000] ; clear motion drive and motion enhance are in the picture adjust menu too if they aren't on default settings ?
Well something is still altering the signal in the yammie as you should have no problem applying e-shift to any sd or hd signal that's truly passed through untouched/ intact with no processing . just tried it on a sd 576i signal .
Not sure about the x box one s outputting dolby atmos;dts-x bitstreams [ shocked a lot understandably] but maybe its coming ; I dunno ; maybe wait for a few new models if you want object decoding soon ?
Ah, good question! I don't remember what the AM bandwidth can be set to, but I do remember it can be reasonably wide. Pretty sure it can handle audio up to at least 9 or 10kHz (i.e. 18-20kHz RF bandwidth), but don't quote me on that yet...
I don't have a working copy of DReaM at the moment (need to recompile it for OS X/macOS) so I can't look, and the available documentation is nowhere near current for that part of it, so I can't say for sure. Anyone else *who's actually used DReaM* able to chime in?
edit: that said, I only have very minimal experience with the Android port and I don't remember if the manual BW option is in there. So, again, don't quote me...