My guess would be a bad connection or too much loss though the connections in the wall plate. Also try another cable from the wall plate to the tv as I've had issues I was blaming on a damaged antenna after bad weather that turned out to be a fly lead from the wall plate that had decided to break some of the strands in the wire causing a 15db drop in signal strength to the tv.
Was just wondering if anyone here has used or installed a Grandview GVM Projector Ceiling Mount Bracket? Details here:
What seems appealing to me is, "Same adjustment range as a 'ball' joint, but each adjustment is lockable for better final image alignment."
From experience ball joint mounts can be tricky to align.
As far as the sweeping statement that DAB+ sounds great goes, to the untrained or more appropriately non-discerning ear, yes it probably does. But do a side by side comparison using the equivalent FM station and you will soon hear the difference, even compared to an average wideband AM received signal. IF the bitrate of the digital were somewhat higher on the stations that could do with it (non-talkback types) and not wasted on the talkback ones then DAB+ would be sooooo much better.
Yes please, as far as fault find goes.
If the example of that as manifested from the Sangean DPR-44 I bought a couple of years ago is anything to go by, then yes. I am extremely disappointed with the AM side of it - however I didn't buy it for the AM receiver obviously, rather the digital. The AM was a bonus as it was one of the extremely few to have an AM tuner section. Unfortunately the sound from the AM section sounds as though it has been limited to about the same as an analog telephone line, IE about a 4k bandwidth.
I will conclude by adding that all my other AM tuners/radios have a very reasonable sound, and one which I use quite regularly is part of a valve radiogram.
Just installed a multi room setup for outdoor entertaining area running RGB cable and Audio set up.
Cable length was around 30 metres in distance, did a quick check by plugging directly into the to from the box. All was good, now once I've put wall plates and joining cables still have a good picture and sound but picture is pretty much black and white.
Whats gone wrong, it's not the tv, tried another tv.
thanks in advance