Sc10 And One Reception
Posted 06 March 2010 - 07:44 AM
Posted 06 March 2010 - 09:42 AM
Some tuners adapt to changes automatically, others need to be manually re-scanned.
The most efficient method of re-scanning is to perform a factory default reset of the tuner, turn power off at the wall for a few seconds, power back on and perform a channel scan.
Let's know if that fixes it.
Posted 08 March 2010 - 10:49 AM
In short no they have not changed any settings.
Depending on your location you may have the wrong channels tuned, please advise your suburb.
If your reception on SC10 is something that comes and goes it could be signal related. antenna may not be tuned correctly, wrong antenna, wrong cable, poor signal, too much signal, poor flylead, faulty wallplate. all of which could be causing your drama.
You need to look at your system to make sure all is ok with it, then we can eliminate all factors to get to the source of the trouble.