Sign in to follow this  
Followers 0
rexi98

Digital Channel frequencies

12 posts in this topic

Hi guys

Is there a list of channels and frequencies somewhere? I had a search of the sit but can't find anything.

I'm setting up my new AverMedia DVBT USB but when search can't find anything but FTV guide and a range of D-44 channels.

Maybe i'm not searching on the correct frequencies? Should I be scanning on a specific frequecny and bandwidth?

Maybe my aerial isn't giving me adequate reception. (I'm near Hurstville in Sydney).

Cheers!

Share this post


Link to post
Share on other sites

Australian 7MHz DVB-T VHF/UHF Channel Plan

Nominal

centre

frequency

(in MHz)

BAND III

6 177.500 (Seven Network - Sydney)

7 184.500

8 191.500 (Nine Network - Sydney)

9 198.500

9A 205.500

10 212.500

11 219.500 (Network TEN - Sydney)

12 226.500 (ABC - Sydney)

BAND IV

27 522.500

28 529.500

29 536.500

30 543.500

31 550.500

32 557.500

33 564.500

34 571.500 (SBS - Sydney)

35 578.500 (Broadcast Australia - Sydney)

BAND V

36 585.500

37 592.500

38 599.500

39 606.500

40 613.500

41 620.500

42 627.500

43 634.500

44 641.500

45 648.500

46 655.500

47 662.500

48 669.500

49 676.500

50 683.500

51 690.500

52 697.500

53 704.500

54 711.500

55 718.500

56 725.500

57 732.500

58 739.500

59 746.500

60 753.500

61 760.500

62 767.500

63 774.500

64 781.500

65 788.500

66 795.500

67 802.500

68 809.500

69 816.500

Some networks also use a +/- 125kHz offset to avoid interference with an adjacent PAL channel; ie Ch 9 Digital Sydney centre frequency is 191.625 MHz.

Share this post


Link to post
Share on other sites

man that's confusing... just to point out something for those that don't know, the channel number is on the left, and the frequency is on the right, seperated by a single space.

eg.

6 177.500 = Channel 6, with a frequency of 177.500 Mhz (or 177500Hz)

Share this post


Link to post
Share on other sites
man that's confusing... just to point out something for those that don't know, the channel number is on the left, and the frequency is on the right, seperated by a single space.

eg.

6 177.500 = Channel 6, with a frequency of 177.500 Mhz (or 177500Hz)

Sorry not my fault! This forum software strips out Tabs and spaces (:<)

Share this post


Link to post
Share on other sites
Australian 7MHz DVB-T VHF/UHF Channel Plan

Nominal

centre

frequency

(in MHz)

BAND III

6 177.500 (Seven Network - Sydney)

7 184.500

8 191.500 (Nine Network - Sydney)

9 198.500

9A 205.500

10 212.500

11 219.500 (Network TEN - Sydney)

12 226.500 (ABC - Sydney)

BAND IV

27 522.500

28 529.500

29 536.500

30 543.500

31 550.500

32 557.500

33 564.500

34 571.500 (SBS - Sydney)

35 578.500 (Broadcast Australia - Sydney)

BAND V

36 585.500

37 592.500

38 599.500

39 606.500

40 613.500

41 620.500

42 627.500

43 634.500

44 641.500

45 648.500

46 655.500

47 662.500

48 669.500

49 676.500

50 683.500

51 690.500

52 697.500

53 704.500

54 711.500

55 718.500

56 725.500

57 732.500

58 739.500

59 746.500

60 753.500

61 760.500

62 767.500

63 774.500

64 781.500

65 788.500

66 795.500

67 802.500

68 809.500

69 816.500

Some networks also use a +/- 125kHz offset to avoid interference with an adjacent PAL channel; ie Ch 9 Digital Sydney centre frequency is 191.625 MHz.

Would these settings work for DTV in Melbourne or are they only for Sydney ?

Appreciate the assistance.

Regards

Kelly14

Share this post


Link to post
Share on other sites

Hey I'm still confused. I'm in Sydney (Sutherland Shire) and can get every channel except for ABC? Who else is having this problem? I have no idea but the bands in the manual are higher than 5. Please help!

Share this post


Link to post
Share on other sites
Hey I'm still confused. I'm in Sydney (Sutherland Shire) and can get every channel except for ABC? Who else is having this problem? I have no idea but the bands in the manual are higher than 5. Please help!

Which suburb in the shire?.... it's a big area :)

There are some UHF translators in the area (eg: Stanwell Park) but most areas of Sutherland Shire are serviced by the main VHF/UHF TX on the north shore.

What antenna are you using? Older antennas were not designed for channels 11 & 12 (12 digital being ABC)

What manual are you referring to?

For the main North Shore transmitters, you require a band 3 & 4 antenna. Band 3 VHF (channels 6-12) for all channels except SBS and D44 which are UHF Band 4.

7 Network Digital VHF Channel 6 177.500 MHz

9 Network Digital VHF Channel 8 191.625 MHz

10 Network Digital VHF Channel 11 219.500 MHz

ABC Network Digital VHF Channel 12 226.500 MHz

SBS Network Digital UHF Channel 34 571.500 MHz

D44 Network Digital UHF Channel 35 578.500 MHz

Share this post


Link to post
Share on other sites

Anyone know the frequency and whotnot for new digital channel 44 in Adelaide ?

Edited by halsboss

Share this post


Link to post
Share on other sites

haloboss,

This is a common experience in this strand. This is because the tuner had a poor signal, cannot find the signal, so the computer users think that it is a tuning problem. So they do as you do and find that the situation is unchanged.

It is common for computer tuners to have poorer sensitivity particularly when working very close to a computer which is quite noisy in the TV bands.

Get the best reception as well as Receiving community TV

AlanH

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0